Metal Panels
From delivery of full-length Tuff-Rib panels to onsite roll forming of Standing Seam, Ibex Metal has got you covered. Browse our profile selection below!
Tried and true, Tuff-Rib panels offer a classic look with wide coverage in a large color variety. This panel features 36” coverage and 3/4” rib height with no length restrictions and optional Dripstop, suitable for low slope roofs with a minimum recommended pitch of 3:12 (or 1:12 with seam sealant). Also available as a vented panel.
Traditional and time honored, the corrugated panel might just give your project the rustic appeal you’ve been looking for. This panel can be rolled in a wide variety of gauges, from 29 to 24. Featuring 3/4” wave, it has a minimum recommended pitch of 3/12 and minimum cut length of 36”. Coverage varies depending upon the gauge and whether the panel is being applied as roofing or siding.
A solid roofing and siding profile, PBR is a durable panel rolled in strong 26ga or 24ga metal. Featuring 36” coverage and a 1-1/4” rib height, this panel has a minimum cut length of 36” and a minimum recommended pitch of 3:12 (1:12 with seam sealant).
A concealed fastener panel that blends a classic wood look with the longevity of metal siding. Featuring 10” coverage and 3/4” rib height, minimum 36-1/2” length, striations are recommended to minimize oil canning.
A concealed fastener standing seam panel with ease of installation, the Snaplock panel is a favorite among contractors and DIYers alike. This panel offers 16” coverage with a 1” seam height in 26ga and 24ga and optional pre-notching. There are no length restrictions, striations are recommended to reduce oil canning
A concealed fastener standing seam panel with ease of installation, the Snaplock panel is a favorite among contractors and DIYers alike. This panel offers 14.75” coverage with a 1.5” seam height in 26ga and 24ga and optional pre-notching. There are no length restrictions, striations are recommended to reduce oil canning
If you want a crisp, clean look, or if you need to waterproof a roof with a low slope, then Mechanical Lock standing seam might be just the panel for you. 16” coverage with a 1.5” seam height in 26ga and 24ga. All fasteners are concealed, no length restrictions, striations are recommended to reduce oil canning.
If you want a crisp, clean look, or if you need to waterproof a roof with a low slope, then Mechanical Lock standing seam might be just the panel for you. 14” coverage with a 2” seam height in 26ga and 24ga. All fasteners are concealed, no length restrictions, striations are recommended to reduce oil canning.
With a fantastic array of options to customize this profile to fit your needs, the 1” Flush Panel is sure to set your project apart! With 16” Coverage and concealed fasteners, this panel is available in 26ga and 24ga and can be used as either siding or soffit. The reveal can be adjusted from 0” up to 3” to give this panel the appearance of a reverse board and batten. Venting is available when used as soffit.
16” wide soffit panel cut to length to fit your project. Available as a solid or vented panel in 29ga or 26ga, 3/8” height.